Cement-Bonded Particle Board

Fiber Cement Board

Through Colored Fiber Cement Board

Pergola Awning Shutter Systems and Engines





ENTR

East and West Sub Corparation /     TR
Homepage        Products        hydroPAN Stone®

hydroPAN Stone®

Description
Properties
Packaging / Storage / Handling

hydroPAN Stone®


tepePAN is a multipurpose building board with flat surface consisting of a mixture of cement and fiber.
 
Produced as a variety of tepePAN for exterior / interior: hydroPAN Stone. 

Advantages of Use


  •  
  • Has decorative timeless texture stone.
  • Offer different architectural and constructive solutions by scene and structural characteristics from base to roof in buildings.
  • Can be used by mechanical installation in ventilated facade system.
  • Can be used on internal spaces for decorative purposes.
  • Can be used in various building projects “ residences, villas, public buildings,industrial buildings,prefabricated buildings…”
  • Can be easily used due to lightweight and long lasting in renovation projects.
  • Can be used as finishing material by painting, coating, wall papers.
  • High impact resistance compared to gypsum based boards.
  • Using as a backer board of int./ext. cladding materials.
  • Using as a sheathing board on floors and roofs.
  • Using as a backer board behind tiles on wet spaces.
  • Easy to install and modification.
  • Easy to cut and drill
  • Light weight and easy to carry.
  • Protect the building from different weather conditions.
  • Provides for heat and acoustic insulations.
  • Resistant to seasonal changes.
  • Resistant to effect of sunlight.
  • Resistant to moisture and water.
  • Resistant to impact.
  • Environment friendly, asbestos free.
  • Odourless and does not release toxic gas.
  • Insect-proof, non putrescible, no moulding.

Areas of Application


Interior
  • Internal walls
  • Floor / Raised floor
  • Mezzanine floor
  • Indoor ceilings
  • Wet spaces
  • Elevator shaft walls 
  • Fire walls 

Exterior
  • External walls & Facades
  • Roofs
  • Outdoor ceilings
  • Soffit and fascia
  • Fences and boundary walls
  • Balcony and parapet
  • Noise barrier

Standard Dimensions  


Thickness

06, 08, 10, 12  mm

Dimensions

1250 x 3000 mm

**** Special dimensions are possible by cutting the standard production size plates in width and length. Please contact for different thicknesses and sizes.
**** tepePAN Products should be cutted with dry cutting method.

Technical Specifications  


Density

1150 ± 75 kg/m3

Thermal Conductivity Coefficient

0,15-0,16 W/mK (10°C dry)

Bending strength 

>7 (Avg 10-11) N/mm2

Modulus of elasticity

>4000 N/mm2

Fire resistance

A1 ( EN 13501-1)

Type & Durability classification 

Category A , Class 2

Areas of Usage


Packaging
Packaging

  • Our panels are transported domestically and internationally with the plate edges painted and the Tepe Betopan® emblem.
  • The panels are on wood pallets covered in plastic with rings and corner brackets added.
  • During transport the panels must be covered in canvas.
  • When the panels are being carried one by one they are recommended to be carried vertically or as close as possible to vertical so as not to be bent.
  • The panels must be stored in a closed area.
  • Whether in storage or at the assembly site the panels must be left in lateral position and should not be leaned either laterally or vertically on a wall or similar surfaces.
  • If the panel packages are to be stacked caution should be taken to align them.
  • If the panels are not going to be used for a long period the packages should be completely covered in plastic to avoid being affected from heat and humidity change (stay stable).
  • After panels are taken from the package to be used the package should be covered over again with the plastic.
  • The storage area must be closed.
  • When stacking pallets the pallet feet should be lined up one on top of the other.
  • Do not take the plastic cover off until use.
  • Do not take off the steel strips until use.
  • The materials should be placed on the smoothest ground possible.
  • When storing, pallets should be carefully placed on top of each other with 5 pallets at most  and the total height of pallets should not exceed 3,5 meters.
  • When loading, only two pallets at a time should be loaded.
  • When loading make sure that the pallets are placed on the truck in a balanced way.
  • Pallets ready for transpor
Packaging